本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM D1654-08(2016)標準詳細信息或ASTM D1654-08(2016)具體測試方法，歡迎致電與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM D1654-08(2016)描述了高性能有機涂料的測試程序和性能要求，這類涂料適用于建筑產品(鋁合金型材和板材)。
ASTM D1654英文版本（節選）
1. Scope
1.1 This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect to corrosion, blistering associated with corrosion, loss of adhesion at a scribe mark, or other film failure.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately)
ASTM Standards
B117 Practice for Operating Salt Spray (Fog) Apparatus
D610 Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D714 Test Method for Evaluating Degree of Blistering of Paints
D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D870 Practice for Testing Water Resistance of Coatings Using Water Immersion
D1014 Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1735 Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D2247 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
D2803 Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D4141 Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
D4585 Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4587 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D5894 Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
D6695 Practice for Xenon-Arc Exposures of Paint and Related Coatings
D7087 Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
E3 Guide for Preparation of Metallographic Specimens
G85 Practice for Modified Salt Spray (Fog) Testing
G87 Practice for Conducting Moist SO2 Tests
